Project CÜRV Heat Pump Water Heater Range Air Sourced 246L Cylinder IPX4 Wall Mounted – CURV-HP250M7
Pallet Fee Information: Due to the size or weight of this item, a pallet delivery service is required, which will be delivered curbside. A pallet fee of £62.50 ex VAT will apply.
Due to this, deliveries will require an extra 48 hours for completion.
Northern Ireland Customers: For orders to Northern Ireland, please contact our customer service team as this fee may be subject to increase.
Free UK mainland delivery on orders over £90
credit
Project CÜRV CURV-HP250M7 Air Source Hot Water Cylinder, 246L
The CURV-HP250M7 combines a large 246-litre capacity with a 1500W backup heater and heat pump efficiency. With IPX4 protection, 0.7MPa pressure rating, and a COP up to 3.45, it is ideal for high-demand hot water needs. Quiet operation at 50dB(A) ensures minimal disruption.
With Eco mode, off-peak scheduling, and Wi-Fi smart control, it helps reduce energy bills while maintaining consistent performance for domestic and commercial use.
KEY FEATURES
- Tank Volume: 246L.
- Voltage/Frequency: 220-240V AC, 50Hz.
- Tank Max Pressure: 0.7MPa.
- Thermal Insulation: 50mm with electronic anode.
- IP Rating: IPX4 splash protection.
- Refrigerant: R290 / 0.15kg.
- Coefficient of Performance (COP): 2.67 @ 2°C, 3.20 @ 7°C, 3.45 @ 14°C.
- Air Flow Rate: 300m³/h.
- Power Input by Heat Pump: 320W rated, 535W max.
- Electric Backup Heater: 1500W.
- Heating Temperature Range (HP only): 35°C - 65°C.
- Heating Temperature Range (HP + Heater): 35°C - 75°C.
- Noise Level: 50dB(A) nominal, 36dB(A) @ 1m.
- Heating Time (7°C ambient): 10.51 hours to set temperature.
Additional Information
- Dimensions (H x W x D) 1989mm x 600mm x 620mm